Metrik Mobile Electronics MCD 476 User Manual

LIMITED ONE YEAR WARRANTY  
This warranty shall be in effect for a period of one year from the date of the first  
consumer purchase. This warranty is valid during the warranty period providing that proof  
of date of purchase from an authorized dealer is presented whenever warranty service is  
required.  
To receive service for this product return it to the Metrik dealer from whom it was  
purchased and such dealer will arrange for service. If shipment of the product is required,  
it should be packed securely. The original dated bill of sale, or a legible copy, must be  
included with the product as proof of warranty coverage.  
Metrik will pay for all labor and material expenses required to repair the product, only.  
Labor expense for the removal and installation of the product is the sole responsibility of  
the consumer. If the product is shipped, the consumer must prepay the initial shipping  
charge to us; Metrik will pay the return shipping charges to the consumer.  
Except as otherwise specified, this warranty covers all defects in material and  
workmanship. The following are not covered: damage resulting from accident, misuse,  
abuse, neglect, product modification, improper installation, incorrect line voltage,  
unauthorized repair or failure to follow instructions supplied with the product, damage  
occurring during shipment (claims must be filed with the carrier), elimination of car static  
or other electrical interferences, any product purchased outside of North America or on  
which the serial number has been defaced, modified or removed.  
MCD-476  
All implied or statutory warranties and conditions, including warranties or conditions of  
merchantability, fitness for particular purposes and non-infringement are limited in  
duration to the length of this warranty.  
Metrik's liability is limited to the repair or replacement, at our option, of any defective  
product and shall not include incidental or consequential economic damages of any kind.  
Some states or provinces have differing limitations. This warranty gives you specific rights  
and you may also have other rights, which vary depending of the state or province in which  
you reside.  
AM/FM RADIO  
CD PLAYER WITH ESP ANTI-SHOCK,  
4 CHANNEL HIGH POWER CAR AUDIO SYSTEM  
METRIK MOBILE ELECTRONICS  
a division of SAMSON ELECTRONICS, INC.  
3400 E. SLAUSON AVE.; MAYWOOD, CA 90270  
TOLL FREE: 866-572-6766  
TROUBLESHOOTING  
HANDLING COMPACT DISCS  
MOISTURE CONDENSATION  
On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit.  
Should this occur, the unit will not operate properly. Insuch a case, remove the disc and wait  
for about an hour until the moisture has evaporated.  
NOTES ON CDS  
NOTES ON DISCS  
P r o b l e m  
C a u s e  
A c t i o n  
1. Adirty or defective disc may cause sound  
dropouts while playing. Toenjoy optimum  
sound, handle the disc as follows.  
Handle the disc by its edge. Tokeep the disc  
clean, do not touch the surface(P.1)  
If you use the discs explained below, the  
sticky residue can cause the CD to stop  
spinning and may cause malfunction or ruin  
your discs.  
Do not use second-hand or rental Cds that  
have a sticky residue on the surface (for  
example, from peeled-offstickers or from  
ink, or glue leaking from under the stickers).  
There are paste residue.  
Yellow wire not connected or incorrect voltage  
Red wire not connected or incorrect voltage  
Black wire not connected  
Check connections for proper voltage  
(11-14.4VDC)  
Check connection to ground  
Unit will not turn on  
(no power)  
Fuse blown  
Replace fuse  
Speaker wires not connected  
Check connections at speakers  
Unit has power  
(but no sound)  
One or more speaker wires touching each  
other or touching chassis ground  
Insulate all bare speaker wires from  
each other and chassis ground  
P.1  
Ink is sticky (P.5).  
2. Do not stick paper or tape on the disc (P.2)  
Yellow or red wire touching chassis ground  
Check for pinched wire  
P.5  
Do not use rental Cds with old labels that  
are beginning to peel off.  
Unit blows fuses  
Excessive skipping  
Speaker wires touching chassis ground  
Incorrect fuse rating  
Check for pinched wire  
P.2  
Use fuse with correct rating  
Stickers that are beginning  
to peel away, leaving a  
3. Do not expose the discs to direct sunlight or  
heat sources such as hot air-ducts, or leave  
them in a car parked in direct sunlight where  
there can be a considerable rise in  
Unit is not mounted correctly or back strap is  
not secure  
Check mounting sleeve and back strap  
support  
sticky residue (P.6).  
P.6  
Physical defect in media(CD)  
Do not use your Cds with labels or stickers  
attached.  
Check media for scratches  
temperature inside the car (P.3).  
Labels are attached (P.7).  
P.7  
P.3  
Do Not Use Special Shape Cds  
4. Before playing, clean the discs with an  
optional cleaning cloth. Wipe each disc from  
the centre out (P.4).  
Be sure to use round shape Cds only for  
this unit and do not use any special shape  
Cds. Use of special shape Cds may cause  
the unit to malfunction.(P.8).  
P.8  
P.4  
Be Sure to use Cds with disc mark  
5. Do not use solvents such as benzine,  
thinner, commercially available cleaners, or  
antistatic spray intended for analog discs.  
DIGITAAL AUDIO  
DIGITAAL AUDIO  
DIGITAAL AUDIO  
RECORDABLE  
RECORDABLE  
Only for this unit.  
CD-Rs and CD-RWswhich have not undergone finalization processing cannot be played.  
(For more information on finalization processing, refer to the manual for your CD-R/  
CD-RW writing softwareor CD-R/CD-RW recorder.) Addition software or depending on  
the recording status, it may prove impossible to play certain Cds record on CD-R or CD-RW.  
8
1
INSTALLATION GUIDE  
BUTTON FUNCTION  
RDM  
Preparation  
Please read entiremanual before installation.  
When no trackis playing, pressRDM” to shuffle,the word “RNDwill displays onLCD screen  
and blinking. Press selects a track. Press STOP cancels the shuffle and stop playing a  
track.  
Before You Start  
Disconnect negative battery terminal.(consult a qualified technician for instructions)  
Avoid installing theunit where it would be subject to high temperatures, such as from  
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.  
PRO  
When no trackis playing, pressPRO” to setupa play list, while “O” isblinking on LCD, press  
navigates to thedesired track andpress “PRO” againto save thattrack into theplay list. Then  
the screen backto blinking, keeprepeating previous procedureto save thedesired track into  
the play list. A play list maximumcan save 20tracks. Once aplay list reachesthe maximum,  
the screen displays -- ”. Press “STOP” tostop programming playlist. Press “PRO” again,  
back to theplay list, navigatesto the desiredtrack; press “MODor “PWR” todeletes the track  
from the playlist. Press “PLAY” to playthe play list. While playing aplay list, pressREP” to  
play a trackrepeatedly.  
Getting Started  
Remove 2 transitscrews located  
on top ofthe unit.  
Insert the suppliedkeys into the  
slots as shown, and slide theunit  
out of themounting sleeve.  
SECURITY  
LED  
Install mounting sleeveinto  
Opening, bending tabsto secure.  
Connect wiring harnessand  
antenna.(consult a qualified  
technician if youare unsure)  
Certain vehicles mayrequire an  
installation kit and/orwiring  
harness adapter(sold separately).  
Testfor correct operationand slide  
into mounting sleeveto secure.  
Snap trim ringinto place.  
T-UP/DOWN  
Press“  
”go tonext song, press“  
”go to previoussong.  
” fast backward.  
KEYS  
Long press “  
” fast forward, long press “  
TUNE  
HEX NUT  
When is onradio mode, rotatethe TUNE buttonleft/right to turnthe station.  
PLAIN WASHER  
OPEN  
MOUNTING STRAP  
Press the OPEN to allow the front panel to detachable panel.  
SPRING WASHER  
TAPPING SCREW  
EJECT  
Press EJ toreject a CDfrom the cartridge, the CD cartridgewill automatically closeonce we  
push the cartridgeor wait for10 seconds. Longpress EJ forceto reject theCD from allmodes.  
HEX BOLT  
CD Switch Between Modes  
The product hastwo modes: CDmode and Radiomode. Switch betweentwo modes asfollow:  
MOUNTING SLEEVE  
A: Switch fromRadio Mode toCD Mode  
1)Under Radio Modeinsert CD  
2)Press MOD, switchto CD Mode  
3)Start reading CD, displays total numberof tracks inLCD  
4)Press PLAY, start toplay  
B: Switch fromCD Mode toRadio Mode  
Under CD Modepress MOD toswitch to RadioMode  
Remarks: Must PressPLAY to play thetrack  
2
7
BUTTON FUNCTION  
WIRING INSTRUCTION  
BAND  
Press BAND button to switch between FM/AM.  
Speakers Connection  
This unit can mate with 4 as well as 8 speakers .Make sure  
Power is off before connecting.  
STOP  
Press STOP to stop playing a track.  
Caution:  
Do Not Short speaker wires to chassis ground . It may cause severe  
damage.  
REP  
Press REP playsa track repeatedly; long press REPplay all tracks repeatedly.  
PLAY  
Ground Connection  
Connect Black Wire to Ground terminal. If not found, connect it to  
the chassis instead.  
Press PLAYto play firsttracks from CD. While it isplaying a track, press PLAYto pause/  
resume the track, the word “PLAY” will displayson the screenand blinking.  
DISP  
Power Connection  
Press DISP buttonto display time, long press the DISP button tosetup the time.  
When the time blinks, press H/M button to set hour/minute; hold H/M to increase H/M  
sequentially.  
First connect the red Wire (w/3Amp fuse ACC) to ignition output.  
battery power. Make sure no other device, such as switch, in between.  
Then connect orange Wire(w/1 Amp fuse block) directly to +12v  
POWER ON/OFF  
Antenna Connection  
Insert coaxial connector to antenna socket.  
Press PWR toturn on/off thepower.  
VOLUME  
Caution:  
When is on radio/CDP mode, turnthe VOL button clockwise to increase the volume, turn  
anticlockwise to decrease the volume.  
If a fuse is blown , only replace it with one of the sam e rating.  
Other wise may cause severe damage . Repeated blown fuse indicates  
potential problem(s) exists. A thorough inspection is recommended.  
MODE  
Press MOD toswitch to CDmode. If noCD inside thecartridge, the LCDshows “__”.  
When you inserta CD intothe cartridge, itreads the CDautomatically, anddisplays  
number of trackson LCD (Ifa CD isnot readable, itdisplays “E”).  
CLOCK  
1) Press DISPto display clock.  
Long press DISPto setup the time, while it is blinking, press H/M press to adjust the time.  
It will display the time, if you press DISPbutton again or left it for 5 seconds .  
2) Press “H” once to increase one hour, long press to increase sequentially.  
3) Press “M” once to increase one minute, long press to increase sequentially.  
6
3
WIRING DIAGRAM  
CONTROL LOCATIONS  
CONNECTIONS  
ANTENNA  
SOCKET  
17  
16  
1
RED  
R
GRAY  
RCA OUT  
WHITE  
L
B1:VIOLET + (RR)  
A
2
B
B2:VIOLET/BLACK - (RR)  
B3:GRAY + (RF)  
A4:RED ACC  
1
3
5
7
2
4
6
8
1
3
5
7
2
B4:GRAY/BLACK - (RF)  
B5:WHITE + (LF)  
A5:BLUE ANTENNA  
A7:YELLOW B+  
A8:BLACK GND  
4
6
8
B6:WHITE/BLACK - (LF)  
B7:GREEN + (LR)  
3
4
15  
B8:GREEN/BLACK - (LR)  
Right Front  
Gray/Black(-)  
Gray(+)  
5
YELLOW  
B+  
3A  
1A  
Right Rear  
Violet/Black(-)  
Violet(+)  
BLUE  
RED  
ANTENNA  
POWER  
ACC  
Left Rear  
Green/Black(-)  
Green(+)  
BLACK  
GND  
Left Front  
White/Black(-)  
White(+)  
12  
10  
13  
14  
6
9
7
8
10  
11  
SPECIFICATIONS  
BAND  
STOP  
1
2
3
4
HOUR  
CD PLAYER  
Frequency response:10HZ-20KHZ  
Channel separation @1KHZ:>65dB  
D/A converter:1Bit  
11  
12  
RDM  
PRO  
S/N:  
60dB  
REP  
FM TUNER  
Tuning range:87.5MHZ-108MHZ  
Usable sensitivity:20dBu  
PLAY  
13 T-DOWN  
Stereo separation @1KHZ:30dB  
Frequency response:50HZ-10KHZ  
DISP  
5
6
7
8
9
14  
T-UP  
POWER  
AM TUNER  
GENERAL  
Tuning range:520KHZ-1600KHZ  
Usable sensitivity:40dBu  
Frequency response:50Hz-3KHz  
15  
16  
TUN  
VOLUME  
OPEN  
Power output:7W 4 @ 4ohms,14.4 VDC  
Operating voltage:11-14.4VDC, negative ground  
Speaker output impedance:4~8ohms  
Line output voltage:200mv-400mv  
MODE  
17 EJECT  
MINUTE  
Dimensions:7 ” 7 ”  
2 ” (178 178 51mm)  
Design and specificationssubject to changewithout notice  
Superior disc readingability: Ableto read CD  
4
5

Pioneer AVH P6050DVD User Manual
Olympus Motor Drive 2 User Manual
Nikon Camcorder WT 2A User Manual
Motorola Car Satellite Radio System DSR 6400 User Manual
Metra Electronics 99 8711 User Manual
Melissa 643 197 User Manual
Kenwood DDX7032M User Manual
KATA Photoline SB 904 User Manual
JVC High Definition Camcorder GZE200BUS User Manual
JVC GY HD200CHU User Manual